dmesg - 2011-10-24 17:47
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.0-mer-tickless (3.0.0) (root@sunnyserver) (gcc version 4.6.1 (Debian 4.6.1-4) ) #5 SMP Wed Sep 14 14:56:28 CEST 2011
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093000 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfda0000 (usable)
BIOS-e820: 00000000cfda0000 - 00000000cfdd1000 (ACPI NVS)
BIOS-e820: 00000000cfdd1000 - 00000000cfe00000 (ACPI data)
BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000042f000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-990FXA-UD5/GA-990FXA-UD5, BIOS F6 10/13/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFE00000 mask FFFFFFE00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000042f000000 aka 17136M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f4c10] f4c10
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000091000] 91000 size 8192
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfda0000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfc00000 page 2M
00cfc00000 - 00cfda0000 page 4k
kernel direct mapping tables up to cfda0000 @ cfd9d000-cfda0000
init_memory_mapping: 0000000100000000-000000042f000000
0100000000 - 0400000000 page 1G
0400000000 - 042f000000 page 2M
kernel direct mapping tables up to 42f000000 @ 42effe000-42f000000
RAMDISK: 372d0000 - 37960000
ACPI: RSDP 00000000000f6b30 00014 (v00 GBT )
ACPI: RSDT 00000000cfdd1000 00048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfdd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfdd1100 07997 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfda0000 00040
ACPI: MSDM 00000000cfdd8b80 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 00000000cfdd8c00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfdd8c40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000cfdd8cc0 00034 (v01 GBT 00000000 00000000)
ACPI: TAMG 00000000cfdd8d30 00202 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 00000000cfdd8ac0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000cfdd8f40 066B9 (v01 MATS RCM 80000001 INTL 20061109)
ACPI: SSDT 00000000cfddf670 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000042f000000
Initmem setup node 0 0000000000000000-000000042f000000
NODE_DATA [000000042eff9000 - 000000042effdfff]
[ffffea0000000000-ffffea000ebfffff] PMD -> [ffff88041e600000-ffff88042c7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0042f000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x00000093
0: 0x00000100 -> 0x000cfda0
0: 0x00100000 -> 0x0042f000
On node 0 totalpages: 4189475
DMA zone: 56 pages used for memmap
DMA zone: 2 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 832984 pages, LIFO batch:31
Normal zone: 45640 pages used for memmap
Normal zone: 3292600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88042ec00000 s70912 r8192 d23296 u262144
pcpu-alloc: s70912 r8192 d23296 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4129497
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 48e0000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
Memory: 16381064k/17547264k available (3389k kernel code, 789364k absent, 376836k reserved, 1549k data, 524k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3624.048 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7248.09 BogoMIPS (lpj=3624048)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
tseg: 00cff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20110413
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD FX(tm)-8150 Eight-Core Processor stepping 02
Performance Events: AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 91000
#2
smpboot cpu 2: start_ip = 91000
#3
smpboot cpu 3: start_ip = 91000
#4
smpboot cpu 4: start_ip = 91000
#5
smpboot cpu 5: start_ip = 91000
#6
smpboot cpu 6: start_ip = 91000
#7 Ok.
smpboot cpu 7: start_ip = 91000
Brought up 8 CPUs
Total of 8 processors activated (57979.04 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110413/tbutils-314)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: [1002:5a1f] type 1 class 0x000604
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: [1002:5a20] type 1 class 0x000604
pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: [1002:5a1e] type 1 class 0x000604
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
pci 0000:00:15.3: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
pci 0000:02:00.0: reg 10: [mem 0xfcff8000-0xfcffffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:09.0: bridge window [mem 0xfce00000-0xfcefffff 64bit pref]
pci 0000:03:00.0: [1000:0079] type 0 class 0x000104
pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
pci 0000:03:00.0: reg 14: [mem 0xfdefc000-0xfdefffff 64bit]
pci 0000:03:00.0: reg 1c: [mem 0xfde80000-0xfdebffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0b.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:04:00.0: [15b3:6274] type 0 class 0x000c06
pci 0000:04:00.0: reg 10: [mem 0xfdc00000-0xfdcfffff 64bit]
pci 0000:04:00.0: reg 18: [mem 0xfc000000-0xfc7fffff 64bit pref]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0c.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0c.0: bridge window [mem 0xfc000000-0xfc7fffff 64bit pref]
pci 0000:05:00.0: [8086:10b9] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [mem 0xfdbe0000-0xfdbfffff]
pci 0000:05:00.0: reg 14: [mem 0xfdbc0000-0xfdbdffff]
pci 0000:05:00.0: reg 18: [io 0xaf00-0xaf1f]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0d.0: PCI bridge to [bus 05-05]
pci 0000:00:0d.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0d.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:0d.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 07-07]
pci 0000:00:15.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:15.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:08:00.0: [1b6f:7023] type 0 class 0x000c03
pci 0000:08:00.0: reg 10: [mem 0xfd5f8000-0xfd5fffff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:15.1: PCI bridge to [bus 08-08]
pci 0000:00:15.1: bridge window [io 0x7000-0x7fff]
pci 0000:00:15.1: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:15.1: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci 0000:09:00.0: [1b4b:9172] type 0 class 0x000106
pci 0000:09:00.0: reg 10: [io 0x6f00-0x6f07]
pci 0000:09:00.0: reg 14: [io 0x6e00-0x6e03]
pci 0000:09:00.0: reg 18: [io 0x6d00-0x6d07]
pci 0000:09:00.0: reg 1c: [io 0x6c00-0x6c03]
pci 0000:09:00.0: reg 20: [io 0x6b00-0x6b0f]
pci 0000:09:00.0: reg 24: [mem 0xfd3ff000-0xfd3ff1ff]
pci 0000:09:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:09:00.0: PME# disabled
pci 0000:00:15.2: PCI bridge to [bus 09-09]
pci 0000:00:15.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:15.2: bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:00:15.2: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 0a-0a]
pci 0000:00:15.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:15.3: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:15.3: bridge window [mem 0xfd000000-0xfd0fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCED._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 0000000000093000 - 000000000009ffff
reserve RAM buffer: 00000000cfda0000 - 00000000cfffffff
reserve RAM buffer: 000000042f000000 - 000000042fffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: [mem 0xd0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x004d]
pnp 00:01: [io 0x0050-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0220-0x0225]
pnp 00:01: [io 0x0290-0x0294]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0220-0x0225] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0900-0x091f]
pnp 00:02: [io 0x0228-0x022f]
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c52]
pnp 00:02: [io 0x0c6c-0x0c6d]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cdf]
pnp 00:02: [io 0x0800-0x08fe]
pnp 00:02: [io 0x0a10-0x0a17]
pnp 00:02: [io 0x0b00-0x0b0f]
pnp 00:02: [io 0x0b10-0x0b1f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [mem 0x00000000-0x00000fff window]
pnp 00:02: [mem 0xfee00400-0xfee00fff window]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0003ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:09:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
system 00:02: [io 0x0900-0x091f] has been reserved
system 00:02: [io 0x0228-0x022f] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c52] has been reserved
system 00:02: [io 0x0c6c-0x0c6d] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x08fe] has been reserved
system 00:02: [io 0x0a10-0x0a17] has been reserved
system 00:02: [io 0x0b00-0x0b0f] has been reserved
system 00:02: [io 0x0b10-0x0b1f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [mem 0xe0000000-0xefffffff]
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x000db200-0x000dbfff]
pnp 00:09: [mem 0x000f0000-0x000f7fff]
pnp 00:09: [mem 0x000f8000-0x000fbfff]
pnp 00:09: [mem 0x000fc000-0x000fffff]
pnp 00:09: [mem 0xcfda0000-0xcfdfffff]
pnp 00:09: [mem 0xffff0000-0xffffffff]
pnp 00:09: [mem 0x00000000-0x0009ffff]
pnp 00:09: [mem 0x00100000-0xcfd9ffff]
pnp 00:09: [mem 0xcfe00000-0xcfefffff]
pnp 00:09: [mem 0xcff00000-0xcfffffff]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: [mem 0xfff80000-0xfffeffff]
pnp 00:09: disabling [mem 0x000db200-0x000dbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x00100000-0xcfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:09: [mem 0xcfda0000-0xcfdfffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0xcfe00000-0xcfefffff] has been reserved
system 00:09: [mem 0xcff00000-0xcfffffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:09.0: bridge window [mem 0xfce00000-0xfcefffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd3ffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0b.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0c.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0c.0: bridge window [mem 0xfc000000-0xfc7fffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xfd800000-0xfd81ffff pref]
pci 0000:00:0d.0: PCI bridge to [bus 05-05]
pci 0000:00:0d.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0d.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:0d.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06-06]
pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref]
pci 0000:00:15.0: PCI bridge to [bus 07-07]
pci 0000:00:15.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:15.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 08-08]
pci 0000:00:15.1: bridge window [io 0x7000-0x7fff]
pci 0000:00:15.1: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:15.1: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci 0000:09:00.0: BAR 6: assigned [mem 0xfd200000-0xfd20ffff pref]
pci 0000:00:15.2: PCI bridge to [bus 09-09]
pci 0000:00:15.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:15.2: bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:00:15.2: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 0a-0a]
pci 0000:00:15.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:15.3: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:15.3: bridge window [mem 0xfd000000-0xfd0fffff 64bit pref]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.0: setting latency timer to 64
pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.1: setting latency timer to 64
pci 0000:00:15.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.2: setting latency timer to 64
pci 0000:00:15.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.3: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:02: resource 2 [mem 0xfce00000-0xfcefffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:04: resource 2 [mem 0xfc000000-0xfc7fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:06: resource 2 [mem 0xfd900000-0xfd9fffff pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:06: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:07: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:07: resource 1 [mem 0xfd700000-0xfd7fffff]
pci_bus 0000:07: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:08: resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:08: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:09: resource 1 [mem 0xfd300000-0xfd3fffff]
pci_bus 0000:09: resource 2 [mem 0xfd200000-0xfd2fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:0a: resource 1 [mem 0xfd100000-0xfd1fffff]
pci_bus 0000:0a: resource 2 [mem 0xfd000000-0xfd0fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6720k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32136
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
ERST: Table is not found!
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2011-10-24 17:40:34 UTC (1319478034)
Freeing unused kernel memory: 524k freed
udevd[66]: starting version 172
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:02:00.0: setting latency timer to 64
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: irq 17, io mem 0xfcff8000
xhci_hcd 0000:02:00.0: Failed to enable MSI-X
xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.0.0-mer-tickless xhci_hcd
usb usb1: SerialNumber: 0000:02:00.0
SCSI subsystem initialized
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.0.0-mer-tickless xhci_hcd
usb usb2: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:08:00.0: setting latency timer to 64
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
xhci_hcd 0000:08:00.0: irq 17, io mem 0xfd5f8000
xhci_hcd 0000:08:00.0: Failed to enable MSI-X
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
xhci_hcd 0000:08:00.0: irq 41 for MSI/MSI-X
megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011
megasas: 0x1000:0x0079:0x8086:0x9261: bus 3:slot 0:func 0
megaraid_sas 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
megaraid_sas 0000:03:00.0: setting latency timer to 64
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.0.0-mer-tickless xhci_hcd
usb usb3: SerialNumber: 0000:08:00.0
e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:05:00.0: Disabling ASPM L1
e1000e 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:05:00.0: setting latency timer to 64
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.0.0-mer-tickless xhci_hcd
usb usb5: SerialNumber: 0000:08:00.0
e1000e 0000:05:00.0: irq 42 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
megasas: FW now in Ready state
megaraid_sas 0000:03:00.0: irq 43 for MSI/MSI-X
libata version 3.00 loaded.
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.0.0-mer-tickless ehci_hcd
usb usb4: SerialNumber: 0000:00:12.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 3.0.0-mer-tickless ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.0.0-mer-tickless ehci_hcd
usb usb7: SerialNumber: 0000:00:16.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 19
ahci 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ahci 0000:09:00.0: irq 44 for MSI/MSI-X
ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:09:00.0: setting latency timer to 64
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m512@0xfd3ff000 port 0xfd3ff100 irq 44
ata8: SATA max UDMA/133 abar m512@0xfd3ff000 port 0xfd3ff180 irq 44
megasas_init_mfi: fw_support_ieee=67108864
megasas: INIT adapter done
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access ATA M4-CT064M4SSD2 0009 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA Hitachi HDS72107 A3BH PQ: 0 ANSI: 5
scsi 0:0:2:0: Direct-Access ATA Hitachi HDS72107 A3BH PQ: 0 ANSI: 5
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 8
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI Host Controller
usb usb8: Manufacturer: Linux 3.0.0-mer-tickless ohci_hcd
usb usb8: SerialNumber: 0000:00:12.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 9
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
e1000e 0000:05:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1b:21:0f:0b:13
e1000e 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.0: eth0: MAC: 1, PHY: 4, PBA No: D50854-003
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI Host Controller
usb usb9: Manufacturer: Linux 3.0.0-mer-tickless ohci_hcd
usb usb9: SerialNumber: 0000:00:13.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 10
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI Host Controller
usb usb10: Manufacturer: Linux 3.0.0-mer-tickless ohci_hcd
usb usb10: SerialNumber: 0000:00:14.5
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 11
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: OHCI Host Controller
usb usb11: Manufacturer: Linux 3.0.0-mer-tickless ohci_hcd
usb usb11: SerialNumber: 0000:00:16.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATAPI: PLEXTOR DVDR PX-810SA, 1.00, max UDMA/66
ata8.00: configured for UDMA/66
ata4.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi: waiting for bus probes to complete ...
ata6.00: configured for UDMA/133
Refined TSC clocksource calibration: 3624.209 MHz.
Switching to clocksource tsc
ata7.00: ATA-8: WDC WD10EACS-00D6B0, 01.01A01, max UDMA/133
ata7.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
usb 8-1: new full speed USB device number 2 using ohci_hcd
usb 8-1: New USB device found, idVendor=03f0, idProduct=3112
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: Officejet J3600 series
usb 8-1: Manufacturer: HP
usb 8-1: SerialNumber: CN7BS5N097053D
usb 8-3: new low speed USB device number 3 using ohci_hcd
usb 8-3: New USB device found, idVendor=046a, idProduct=0011
usb 8-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 8-4: new full speed USB device number 4 using ohci_hcd
usb 8-4: New USB device found, idVendor=1532, idProduct=0007
usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-4: Product: DeathAdder
usb 8-4: Manufacturer: Razer
input: HID 046a:0011 as /devices/pci0000:00/0000:00:12.0/usb8/8-3/8-3:1.0/input/input0
generic-usb 0003:046A:0011.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:12.0-3/input0
input: Razer DeathAdder as /devices/pci0000:00/0000:00:12.0/usb8/8-4/8-4:1.0/input/input1
generic-usb 0003:1532:0007.0002: input,hidraw1: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:12.0-4/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi 0:2:0:0: Direct-Access INTEL RS2BL080 2.13 PQ: 0 ANSI: 5
usb 9-4: new low speed USB device number 2 using ohci_hcd
usb 9-4: New USB device found, idVendor=050d, idProduct=0912
usb 9-4: New USB device strings: Mfr=4, Product=20, SerialNumber=0
usb 9-4: Product: UPS
usb 9-4: Manufacturer: Belkin
generic-usb 0003:050D:0912.0003: hiddev0,hidraw2: USB HID v1.11 Device [Belkin UPS] on usb-0000:00:13.0-4/input0
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
scsi 7:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5
sd 0:2:0:0: [sda] 1462890496 512-byte logical blocks: (748 GB/697 GiB)
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 7:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 7:0:0:0: [sdh] Write Protect is off
sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:2:0:0: [sda] Attached SCSI disk
sde: unknown partition table
sd 4:0:0:0: [sde] Attached SCSI disk
scsi 8:0:0:0: CD-ROM PLEXTOR DVDR PX-810SA 1.00 PQ: 0 ANSI: 5
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 6:0:0:0: Attached scsi generic sg6 type 0
sd 7:0:0:0: Attached scsi generic sg7 type 0
scsi 8:0:0:0: Attached scsi generic sg8 type 5
sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: unknown partition table
sdd: unknown partition table
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 3:0:0:0: [sdd] Attached SCSI disk
sdg: unknown partition table
sd 6:0:0:0: [sdg] Attached SCSI disk
sdh: unknown partition table
sd 7:0:0:0: [sdh] Attached SCSI disk
sdf: unknown partition table
sd 5:0:0:0: [sdf] Attached SCSI disk
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udevd[371]: starting version 172
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
wmi: Mapper loaded
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
ACPI: acpi_idle registered with cpuidle
ib_mthca: Mellanox InfiniBand HCA driver v1.0 (April 4, 2008)
ib_mthca: Initializing 0000:04:00.0
ib_mthca 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ib_mthca 0000:04:00.0: setting latency timer to 64
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: ALC889: BIOS auto-probing.
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
ib_mthca 0000:04:00.0: irq 45 for MSI/MSI-X
ib_mthca 0000:04:00.0: irq 46 for MSI/MSI-X
ib_mthca 0000:04:00.0: irq 47 for MSI/MSI-X
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
loop: module loaded
it87: Found IT8720F chip at 0x228, revision 8
it87: Routing internal VCCH to in7
it87: Beeping is supported
hwmon_vid: Unknown VRM version of your x86 CPU
Bridge firewalling registered
device eth0 entered promiscuous mode
e1000e 0000:05:00.0: irq 42 for MSI/MSI-X
e1000e 0000:05:00.0: irq 42 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): br0: link is not ready
ADDRCONF(NETDEV_UP): ib0: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.16)
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
[drm] Initialized drm 1.1.0 20060810
MXM: GUID detected in BIOS
nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084200a2)
checking generic (a0000 10000) vs hw (d0000000 10000000)
checking generic (a0000 10000) vs hw (f8000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VGA16 VGA - removing generic driver
Console: switching to colour VGA+ 80x25
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 60.84.41.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: BIT table 'd' not found
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00000030
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011312 00000030
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04011310 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[drm] nouveau 0000:01:00.0: 0: 0x00002030: type 0x30 idx 0 tag 0x08
[drm] nouveau 0000:01:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07
[drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBEDB
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC20E
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCC5B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCD4D
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xCF66
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xCFCB
[drm] nouveau 0000:01:00.0: 0xCFCB: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: timingset 255 does not exist
[drm] nouveau 0000:01:00.0: 1 available performance level(s)
[drm] nouveau 0000:01:00.0: 0: memory 500MHz core 360MHz shader 900MHz fanspeed 100%
[drm] nouveau 0000:01:00.0: c: memory 702MHz core 540MHz shader 1188MHz voltage 1200mV
[TTM] Zone kernel: Available graphics memory: 8227130 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x40000000, bo ffff88041bfacc00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
ib_mad: Method 1 already in use
ADDRCONF(NETDEV_CHANGE): ib0: link becomes ready
usb 8-1: usbfs: process 2822 (usb) did not claim interface 0 before use
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
ib0: no IPv6 routers present
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0
ADDRCONF(NETDEV_UP): br1: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
br0: port 1(eth0) entering forwarding state
br0: port 1(eth0) entering forwarding state
ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
br0: no IPv6 routers present